HPSC Safety Officer Syllabus 2026

The Haryana Public Service Commission (HPSC) announced the scheme and syllabus for the Safety Officer in HPGCL, Power Department, Haryana (Advertisement No. 05/2025) on 28 September 2026. The selection has two stages: a 150-mark, 3-hour subjective Subject Knowledge Test with 87.5% weightage, and an interview with 12.5% weightage. Candidates need at least 35% in the test to be called for the interview.

Direct link to Check HPSC Safety Officer Syllabus 2026

HPSC Safety Officer Syllabus 2026 – Quick Overview

HPSC Safety Officer Exam Pattern

Stage 1: Subject Knowledge Test

Stage 2: Interview

The interview carries 12.5% weightage. Interview marks are not stated in the announcement.

Important Notes from HPSC

• Attendance at each stage is mandatory.
• The final merit list is prepared by adding the marks of the Subject Knowledge Test and the interview.

HPSC Safety Officer Syllabus 2026 – Subject-wise Topics

The official syllabus has nine sections. Topics are listed as published by HPSC.

1. National and International Scenario of Skill Development

• Vocational Education System in India
• Current National Policy on Skill Development in India
• Objective and need for skill development in India
• Recommendations of various committees on vocational education
• Scope of skill development

2. Academic and Administrative Management

• Organisation structure of Government ITIs
• Reporting systems, reporting authorities and general administration
• SWOT analysis, vision and mission, goals, strategic planning, internal and external environment management, resource mobilisation, library management, maintenance of academic facilities
• Problem-solving techniques, personal management, value analysis, faculty norms

3. Skill Development Schemes

• Central and State Government schemes such as the Craftsmen Training Scheme
• Pradhan Mantri Kaushal Vikas Yojana (PMKVY), National Skill Qualification Framework (NSQF), State skilling schemes
• Crafts Instructor Training Schemes (CITS)
• National Apprentice Promotion Scheme (NAPS)
• SANKALP Scheme, STRIVE Scheme

4. Engineering Mechanics and Engineering Drawing

• Force and system of forces, equilibrium of rigid bodies, free body diagram, Lami’s theorem
• Laws of Coulomb friction, equilibrium of bodies involving dry friction, belt friction
• Centre of gravity and moment of inertia
• Stress and strain: simple stresses (tensile, compressive, shear, bending and torsion), stress-strain curves, elastic constants
• Engineering graphics and technical drawing: drawing equipment and instruments, conventions, dimensioning, scales
• Theory of projection of planes and solids, orthographic projection

5. Fundamentals of Thermal Science

• Introduction to thermodynamics, properties, forms of energy, thermodynamic systems, steady flow systems
• Types of work, thermodynamic processes, laws of thermodynamics, Carnot theorem
• Concept of enthalpy and entropy
• I.C. engines: two-stroke and four-stroke S.I. and C.I. engines, Otto cycle, Diesel cycle
• Basic idea of refrigeration and air conditioning cycle

6. Basic Knowledge of Workshop Science

• Measuring instruments and gauges, introduction to manufacturing processes, basic terminology
• Materials: engineering materials, properties, nomenclature, basics of heat treatment
• Fitting: tools, measuring and marking, sawing, filing, tapping and die, introduction to drills
• Welding: electric arc and gas welding processes and equipment, soldering and brazing, types of sheets (ferrous and non-ferrous), standard sheet sizes, sheet metal tools
• Metal cutting: classification of machine tools and cutting tools, basic operations on lathe, drilling, shaper, milling, cutting tool material, work-holding devices, cutting parameters (speed, feed, depth of cut)
• Casting: pattern types, moulding sand and its properties, casting process and defects

7. Basic Electrical Science

• Network laws and theorems: Kirchhoff’s laws, network elements, superposition theorem, Thevenin’s and Norton’s theorems, maximum power transfer theorem
• Single-phase A.C. circuits: EMF generation, form factor, peak factor, rms and average value, phasor diagram, resistive, inductive and capacitive circuits, series and parallel circuits, RLC series circuits, resonance, Q factor; three-phase A.C. circuits (general relations)
• Magnetic circuits and transformers: analogy between electric and magnetic circuits, B-H curve, hysteresis loop, inductances in series and parallel, hysteresis and eddy current losses
• Transformers: construction, EMF equation, rating, phasor diagram on no-load and loaded conditions
• Electrical machines and instruments: three-phase induction motors (construction, working, applications); moving iron, PMMC, dynamometer and induction type instruments, torque equation, dynamometer type wattmeter

8. Basic Electronics and Communication Science

• Electronic instruments: general-purpose test instruments, CRO, CRT, semiconductor diodes and applications, PN junction diode, V-I characteristics, ideal diodes, LED, tunnel diode, photodiode
• Half-wave, full-wave and bridge rectifiers, passive filters, regulators, line and load regulation, Zener diode as voltage regulator, SMPS concept, BJT, FET, MOSFET
• Operational amplifiers: summing amplifier, differentiator and integrator; digital electronics: number systems, logic gates, NAND and NOR as universal gates, SR and JK flip-flops
• Introduction to computers: generations, characteristics and classification, components, types of memory, software and its types, operating system, algorithm and flow chart
• Computer networks and communication: LAN, MAN, WAN, network topologies, modes of data communication, internet and its safeguards, router, switches, hub, bridges

9. Civil

• Surveying instruments and uses, civil engineering surveys, building by-laws, properties and tests on construction materials (bricks, cement, coarse aggregate, steel reinforcement)
• Units of fluid properties, types of fluid and flow, flow measurement
• Construction management techniques: bar chart, milestone, network CPM/PERT, construction equipment, notice inviting tender, administrative approval, technical sanction, specification
• Tests on water and waste water, Environment Protection Act, sources of air pollution, National Clean Air Programme
• Types of dams and canals, rainfall measurement, safe bearing capacity of soil, methods of building estimates, forms used in the public works department

Points to Note About the Syllabus

• The published syllabus has no section titled with safety laws or industrial safety. Prepare strictly from the nine sections above and check with HPSC if you need clarification.
• Weightage of each section and the number of questions are not available in the announcement.

Recruitment Details (From Third-Party Coverage of Advt. No. 05/2025)

The following points come from job portals reporting on the June 2025 advertisement, not from the announcement above. Verify them on hpsc.gov.in.

Important Dates

How to Prepare for the HPSC Safety Officer Test

1. Print the official syllabus and mark each of the nine sections.
2. Practise long-form written answers, since the paper is subjective. Time yourself against the 3-hour limit.
3. Write in English, as the question paper will be in English.
4. Target well above 35%. The interview call depends on it, and the test carries 87.5% of the final merit.
5. Revise diagrams and derivations for mechanics, thermodynamics, electrical and drawing topics.

HPSC Safety Officer Syllabus 2026 – Important Links

Tags: HPSC Safety Officer Syllabus 2026, HPSC Safety Officer Syllabus, HPSC Safety Officer Exam Syllabus 2026, HPSC Safety Officer Exam Pattern 2026, HPSC Safety Officer Syllabus PDF, Haryana Safety Officer Syllabus 2026, HPSC Safety Officer Recruitment 2026